- MHD Part #: CA-200A
- |
- Brand: Sunair
A/C Compressor Clutch - Fits Sanden Comp. 510
Sunair CA-200A is a 12 V Sanden 510-style A/C compressor clutch featuring a 132 mm outside diameter and 2-groove (A2) pulley. A keyed hub and single-wire bullet terminal support fast, repeatable service on heavy-duty HVAC systems. Use it to restore compressor engagement and belt alignment with a 39.55 mm clutch-to-flange offset.
50+ Available to Order - Ships tomorrow
Estimated delivery time (3 to 7 days)
Secure checkout process with
 |
Application and Fit
The Sunair CA-200A is an A/C compressor clutch engineered for Sanden 510-style applications in heavy-duty trucks and off‑highway equipment. It pairs a 12 V coil with a 2-groove (A2) pulley to support dual-belt drives, delivering dependable engagement under load. A keyed hub provides positive torque transfer on the compressor shaft, and a single-wire bullet terminal streamlines electrical hookup during field service.
This clutch is a practical replacement choice to restore compressor operation without replacing the entire unit. Typical use cases include fleet maintenance where minimizing downtime and preserving belt alignment are priorities. Cross-references include Sanden 65196010 and common aftermarket/OE listings such as MEI 5123, Mack 509285, and Sterling E8HZ2884A/E8HZ984A/F0HZ19D786A (verify against the installed compressor and vehicle build).
Specifications and Service Notes
Key specifications: 12 V coil; 132 mm maximum diameter; 39.55 mm clutch-to-flange offset; 2-groove (A2) pulley; keyed mounting; one wire with bullet terminal; one electrical terminal. Country of origin: China. VMRS: 001-001-034. These dimensions support proper belt tracking and clearance in many Sanden 510-style configurations. For best results, confirm pulley groove profile, diameter, mounting offset, and terminal style against the original unit or OE documentation prior to install.
Product Features
- 12 V coil provides direct compatibility with common heavy-duty vehicle electrical systems.
- 2-groove (A2) pulley supports dual-belt drives to maintain compressor grip under load.
- 132 mm outside diameter fits typical Sanden 510-style clutch envelope for easier clearance planning.
- Keyed hub mounting delivers positive torque transfer and reduces slippage on the compressor shaft.
- Single-wire bullet terminal simplifies electrical hookup and speeds service.
- 39.55 mm clutch-to-flange offset helps maintain belt alignment and minimize belt wear.
- Cross-references to popular OE and aftermarket numbers to streamline sourcing and stocking.
Product Specifications
| Brand: | Sunair |
|---|---|
| Part Number: | CA-200A |
| Product Type: | Sanden Style |
| Compressor Compatibility: | Sanden 510 style |
| Voltage: | 12 V |
| Clutch Maximum Diameter: | 132 mm |
| Clutch-to-Flange Offset: | 39.55 mm |
| Belt Grooves: | 2 (A2) |
| Mounting Type: | Keyed |
| No. of Wires: | 1 |
| Terminal Quantity: | 1 |
|---|---|
| Terminal Type: | Bullet |
| Country of Origin: | CHINA |
| VMRS: | 001-001-034 |
| SPN: | CA-200A |
| Shipping Weight: | 6.69 (lbs) |
| Shipping Height: | 2.76 (in) |
| Shipping Width: | 6.69 (in) |
| Shipping Length: | 6.69 (in) |
| Name | Interchange |
|---|---|
| A&I Products | A600729 |
| Air Source | 5123, MEI5123 |
| Automan | 83032001 |
| Mack | 509285 |
| Road Choice | ACL2310, RCACL2314 |
| Sanden | 65196010 |
| Sterling | E8HZ2884A, E8HZ984A, F0HZ19D786A |
Files and Downloads
Similar products in this category...
SImilar products that you may find useful!
